Glossary Overview |
© 2012 SMS Siemag AG All rights reserved Reproduction only with the permission of SMS Siemag AG, Düsseldorf |
Two six-high mills for Nanshan Light Alloy
Both our CVC six-high HS cold rolling stands at Nanshan Light Alloy went into operation in March 2007. Owing to their wide range of products, they form the central production units of the new Yentai works on the east coast of China. The two six-high stands are equipped with CVC® plus for profile and flatness control, HS system for horizontal stabilisation of the work rolls and hot edge spray for influencing the strip edges. We have also supplied two multi-plate filters and the SMS Siemag Airwash exhaust-air cleaning system for the mill.
Technical data of the breakdown mill
Commissioning: 2007
Annual capacity: 120,000 t
Rolling speed: max. 1,500 m/min
Strip width: 950 - 2,100 mm
Strip gauge, entry: max. 10.0 mm
Strip gauge, exit: min. 0.2 mm
Product range Aluminum and aluminum alloys of the 1xxx, 3xxx, 5xxx and 8xxx series
Annual capacity: 120,000 t
Rolling speed: max. 1,500 m/min
Strip width: 950 - 2,100 mm
Strip gauge, entry: max. 10.0 mm
Strip gauge, exit: min. 0.2 mm
Product range Aluminum and aluminum alloys of the 1xxx, 3xxx, 5xxx and 8xxx series
Technical data of the strip mill
Commissioning: 2007
Annual capacity: 120,000 t
Rolling speed: max. 1,800 m/min
Strip width: 950 - 2,100 mm
Strip gauge, entry: max. 3.5 mm
Strip gauge, exit: min. 0.1 mm
Product range: Aluminum and aluminum alloys of the 1xxx, 3xxx, 5xxx and 8xxx series
Annual capacity: 120,000 t
Rolling speed: max. 1,800 m/min
Strip width: 950 - 2,100 mm
Strip gauge, entry: max. 3.5 mm
Strip gauge, exit: min. 0.1 mm
Product range: Aluminum and aluminum alloys of the 1xxx, 3xxx, 5xxx and 8xxx series
SteelAluminumNonferrous metals |
|